An attic insulation project should start with the way the roof and attic are built—not a one-size-fits-all material recommendation. For this Wellesley, Massachusetts project, On Time Insulation’s recorded scope called for a hybrid attic spray foam system combining closed-cell and open-cell foam, with a specified R-38 target.
The attic before installation
The initial project photos show exposed roof sheathing and rafters above an attic containing ductwork and existing loose-fill insulation on the floor. That distinction matters: insulation at the attic floor and insulation along the roofline are different approaches, and the right assembly depends on the home’s ventilation, moisture conditions and equipment.

The recorded scope: hybrid spray foam, R-38
This job is marked completed in our field record. Its specified attic system combines closed-cell and open-cell spray foam. R-38 is the documented project specification, not a performance measurement established by the photographs. The available record does not identify layer thicknesses, so we are not assigning thicknesses or claiming a tested whole-assembly R-value here.
A hybrid system uses the two foam types as part of a planned assembly. Product selection, layer thickness, moisture control and required protective coverings must be addressed for the particular attic. Learn more about our spray foam insulation services.
Before and after: what changed visibly
The selected photos look toward the same attic end window, with matching ductwork and framing landmarks. In the later photo, applied foam covers the previously exposed sloped roof surfaces and the surrounding end-wall area. The camera positions differ, but the architectural details connect the two views.

These are installation-stage photos, not a finished-room reveal or a substitute for inspection. They do not establish air-leakage results, energy savings, final protective-covering compliance or measured indoor comfort. Existing floor insulation remains visible; this article does not claim it was removed.
Planning attic insulation in Wellesley
For homeowners considering a similar project, the useful first question is where the home’s insulation and air-control boundary should be. Roof condition, existing insulation, attic access, ventilation and mechanical equipment all affect that decision. A roofline foam system is not automatically the right choice for every attic.
Explore our insulation services in Wellesley, MA, or schedule an on-site insulation assessment to discuss your attic and a written scope for your home.
